Deluge second screen / Web MIDI over USB

BRIBELUGE COMPANION

A second screen for the Synthstrom Deluge running Bribeluge, on a phone or tablet over USB.Chrome or Edge. Works with stock community firmware 1.3 too. Add it to your home screen to run it fullscreen and offline.

Get the firmware

Connect your Deluge

  1. Plug in. Run a USB cable from the Deluge's USB port to your phone or tablet. Use a USB-C (or OTG) cable or adapter that carries data: some cables only charge.
  2. Open in Chrome. Open this page in Chrome. Other Android browsers may not support Web MIDI.
  3. Tap Connect in the bar below, then Allow when Chrome asks to control your MIDI devices.
  4. You're live. The Deluge port is picked for you and the light turns green. Any of the Deluge's ports works.
  5. Optional: install it. Chrome menu ⋮ → Add to Home screen. It then runs fullscreen, keeps the screen awake and reconnects on its own.
  6. Hide this header once you've connected. Tap the pink HIDE HEADER tab under the bar for more room. It folds by itself when the Deluge connects, and comes back from the same tab.

Firmware: everything works with Bribeluge v1.32 or later. Plain community firmware 1.3 works in STOCK mode after a one-time MIDI Follow setup, listed in the app once you pick STOCK. The STOCK / BRIBELUGE switch picks itself when the Deluge answers.

Bribeluge Companion
-BPM
-
Not connected

Tap to select, like turning the select knob. Tap it again, or Load, to press select.

Waveform
REVERSED RECORDING LOADING
Song
waiting
-
MIDI Follow

Drag a knob up or down. Values arrive when you change track or move a knob on the Deluge; dimmed ones don't apply to this track.

Set up the Deluge (once)
  1. SETTINGS > MIDI > MIDI-FOLLOW > CHANNEL A: set it to the MIDI Follow channel above.
  2. SETTINGS > MIDI > MIDI-FOLLOW > FEEDBACK > CHANNEL: set it to A, so the knobs here show the Deluge's values.
  3. Keep SETTINGS > MIDI > CLOCK > OUT on for the tempo and play light.
  4. For each button: go to SETTINGS > MIDI > COMMANDS, pick the command, hold LEARN and tap Send below. The Deluge learns it for this USB port.

Running Bribes firmware? Switch to BRIBELUGE for preset names, engine pictures, pickers, the browser, waveforms and song views. Get the firmware.

Debug